Prolycht Orion 300 FS RGBACL LED Light — Dry Hire

The Orion 300 FS is a six-colour (RGBACL) LED fixture built to replace multiple conventional lights on a production — matching CCT from 2,000K to 20,000K with full green/magenta correction, and reproducing 46 common light sources and over 300 Rosco/LEE gel colours natively via Prolycht's Hyperlight colour engine. With Ra 96 / TLCI 98 colour rendering and tight colour consistency (2 SDCM at full output), it's a fixture DoPs can trust to match daylight, tungsten, or heavily stylised colour on set without gel changes eating into the schedule.

At 320W maximum draw the head is genuinely portable for its output, runs from mains (100–240V) or dual V-mount/Gold-mount batteries for location and OB work where power isn't guaranteed, and is controllable via 5-pin DMX, built-in Art-Net over LAN, or the ChromaLink app over Bluetooth/Wi-Fi — making it easy to bring into an existing lighting desk or run standalone. Beam angle and output character change with Prolycht's optics/modifiers (from spot to broad wash), giving productions one fixture that covers key, fill and background roles.

Available as a dry hire from MSG Broadcast — head and control box as standard; DMX cabling, stands, and modifiers available on request.

Key Specs

  • Six-channel RGBACL LED colour mixing (Hyperlight engine)

  • CCT range 2,000K–20,000K with full green/magenta adjustment

  • CRI Ra 96 / TLCI 98; colour shift 2 SDCM at 100% output

  • Matches 46 light sources and 300+ Rosco/LEE gels in-app

  • Max power draw 320W; AC 100–240V or dual 14.8V battery (V-mount/Gold-mount) operation

  • Control via 5-pin DMX in/out, built-in Art-Net (LAN), or ChromaLink app (Bluetooth/Wi-Fi)

  • Dimming 0–100% in 1,000 steps; L70 rated life 50,000 hours

  • Head approx. 3.7kg, control box approx. 3.2kg; IP20

Best for

The Orion 300 FS earns its keep where colour accuracy is the problem rather than output. Six emitters instead of the usual three means it can sit alongside tungsten practicals, mixed office fluorescents or daylight through a window and actually match, rather than being gelled into an approximation.

  • Interviews and corporate shoots in rooms with mixed existing light

  • Studio and webcast sets where fixtures must stay matched over long sessions

  • Drama and commercial work needing specific gel colours reproduced natively

  • Multi-camera shows where every camera has to see the same colour

  • Jobs where carrying a gel kit and a colour meter is not practical

Collection and delivery

Dry hire collection is from Coldharbour Lane, Harpenden, Hertfordshire AL5 4UN — minutes from the M1 and close to Luton, St Albans, Watford and north London. We deliver UK-wide, and fixtures can be supplied crewed if you would rather we rig and balance them.

Related equipment

READY TO HIRE THIS EQUIPMENT?

Get in touch with our team to check availability, discuss technical requirements, or book your dry hire.